Find suitable spare parts or accessories to your Einhell products.
TE-CC 2025 UF
The Einhell TE-CC 2025 UF table saw with format format function, featuring a carbide-coated precision saw blade, is a solid basic machine for precision cuts when shortening individual workpieces and cutting them to size. The flat aluminium table has outstanding sliding properties for precision cuts. The table can be extended out to the back and on the right-hand side, and for wide workpieces the TE-CC 2025 UF has a wide stop rail. To keep a safe distance from the saw blade there is a push stick with holder. The format slide provides help on performing precise long cuts. Two-in-one saw blade adjustment enables the height and angle of the blade to be adjusted to the requirements of each sizing cut. The parallel stop has fasteners on both sides. The cross stop has an angle scale for miter cuts. For a better view of each cut the blade guard is transparent. The housing is equipped with a chip extractor connection to make it easy to keep the workplace clean. For mobile use the folding base frame of this bench-type circular saw has wheels. An accessory holder is provided for organized transport. The overload switch protects the motor from damage in the event of overvoltage.
|Mains supply||220-240 V | 50 Hz|
|Max. power (S6 | S6%)||2000 W | 20 %|
|Idle speed||4500 min^-1|
|Saw blade||250 mm x 30 mm|
|Swiveling range of saw blade||45 °|
|Max. cutting height at 45°||53 mm|
|Max. cutting height at 90°||78 mm|
|Height adjustment continuous||0-78 mm|
|Working height||850 mm|
|Size of working table||645 mm x 530 mm|
|Table broadening right||645 mm x 150 mm|
|Table length extension back side||530 mm x 65 mm|
Pruduct was added to the comparison list.Open comparison list